DK Detachable Teeth Sprockets

Any damage around the teeth surfaces of the sprocket diminishes the lifestyle from the conveyor chain.
With typical sprockets, considerably worn sprocket teeth had been repaired by teeth padding or the entire sprocket was replaced. In both situation, repair was pricey and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers for that dramatic cost savings in price and time.
Structure
The teeth can be replaced by two solutions: individual tooth replacement or sectional teeth substitute.
The bolts and nuts used for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated about the ideal.
The over photo along with the prime ideal illustration show a sprocket for personal tooth replacement. Because the joint face amongst the replaced teeth as well as sprocket is formed in the exclusive arc, the bonding accuracy is high as well as the sprocket strength is enhanced. Moreover, since the load acting on the mounting bolts is decreased, there is less probability of loosening. This sprocket construction is patented.
There are actually two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for huge sprockets getting hefty loads and welded sheet steel hubs for other applications.