We – EPG Team the biggest gearbox & motors , couplings and gears manufacturing facility in China with 5 diverse branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Product attribute:
1. Stator size is optional
two. Protected, reliable, reduced sounds, great commencing, long daily life
three. Strong electricity
Rated voltage a hundred and ten~120V/220~240V-50/60Hz
Common utilised:
Compact large-performance supporter motor utilized on Refrigerator, Ice Chest, Condensing plant, Ventilator And so forth
one. Stator size: 82*25mm
2. Speed: 1750RPM
3. Secure, reputable, lower noise, good starting, prolonged life
Machanical parameter:
Voltage(V): a hundred and ten-240
Frequency: fifty/60Hz
Present(A): .seventy five
Input Energy: 70W
Torque: 100mN. M
Shaft diameter(mm)=4-6mm
Shaft size(mm)=according to customer’s need
Speed(r/min)=according to customer’s necessity
Recent(A)=according to customer’s need
Enter electricity(W)=according to customer’s requirement
Model | STATOR Dimensions | SHAFE DIA | VOLT | Input Energy | TORQUE (g.cm) | Velocity RATED |
YJ8213 | 13mm | 5mm | 110-240V | 40W | 80.51mN.m | 1550RPM |
YJ8216 | 16mm | 6mm | one hundred ten-240V | 50W | 85.82mN.m | 1500RPM |
YJ8219 | 19mm | 7mm | a hundred and ten-240V | 65W | 100mN.m | 1650RPM |
YJ8225 | 25mm | 7mm | 110-240V | 70W | 118mN.m | 1750RPM |
YJ8230 | 30mm | 8mm | one hundred ten-240V | 85W | 150mN.m | 1800RPM |
ABOUT US
Ritscher team was established up in 2006.we always target on micro-motors for home electrical equipment and industry equipment because environment up.at the moment we have two skilled micro-motor factories in China which severally located in HangZhou town and HangZhou metropolis.it has an region of 25,000 square meters crops and a lot more than three hundred employees, annual output is 3 million pcs and has 5 million pcs annual creating ability.soon after numerous years improvement,we experienced developed a fantastic status in the market and obtained much more and a lot more customers’ trust in the globe.
We started from shaded pole motors at beginning, up to now,our merchandise included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise are commonly utilised for making fridges, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage equipment and many other equipments.
As a realiable top quality guaranty,Ritscher has comprehensive R&D departement,QC section,producing division,buy section etc. has ideal creating gear like Aluminum diecasting, Zinc diecasting, Sheet metallic stamping, Plastic injection molding etc. also check/ detection gadget like multiplex temp measuring system, performance parameter inspection device, Phenol peptide remedy pinhole tester,Anechoic room and so forth.
Endeavoring to provide the very best product and support to consumers,we usually do the most hard work to turn into an outstanding company of micro motors.
Ritscher is always inclined to build sincere organization relationship with buddies from all in excess of the planet.
Welcome get in touch with with us!
Get ritscher ,take pleasure in modern lifestyle!
Our organization FAQ for you
(1) Q: What variety motors you can supply?
A:For now,we mostly supply Kitchen Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and many others.
(2) Q: Is it possible to go to your factory
A: Positive. But make sure you kindly keep us posted a couple of days in progress. We need to have to examine our
timetable to see if we are offered then.
(3) Q: Can I get some samples
A: It is dependent. If only a couple of samples for personalized use or alternative, I am afraid it will
be challenging for us to give, due to the fact all of our motors are custom produced and no inventory
available if there is no more demands. If just sample screening ahead of the formal buy and
our MOQ, price tag and other terms are suitable, we might really like to provide samples.
(4) Q: Is there a MOQ for your motors?
A: Of course. The MOQ is amongst one thousand~ten,000pcs for distinct designs after sample acceptance.
But it is also ok for us to settle for more compact lots like a couple of dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ need. But the considerably less the much better (like no more than 5pcs) on problem that the amount is enough in situation any modifications needed soon after first tests.
The use of unique equipment manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the listed substitute components contained herein are not sponsored, authorized, or produced by the OEM.