We – EPG Team the biggest worm gearbox, couplings and gears factory in China with 5 diverse branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

MY E Sequence

• Specs:

Product	Unit	MY1200E	MY1300E	MY1five00E
Max. Paper Size	mm	1200X780	1300*960	1500X1100
Min. Paper Dimensions	mm	350X350	four hundred*410	500X410
Max. Die-slicing Dimensions	mm	1180X760	1280*940	1480X1080
Max. Speed	sh/h	-5000	-4600	-4000
Max. Wor ept Stress	T	three hundred	300	three hundred
Max. Paper Thickness	mm	one-seven	one-7	one-seven
Die-cutting Precision	mm	±0.five	±0.5	±0.5
Total Power	KW	15	fifteen	19
Whole Bodyweight	T	12500	14000	17000
All round Dimension	mm	6730*4000*2145	7250*4100*2145	7700*4600*2205

• Features of the device:

Major Characteristics:

• The Bobst sort lower structure helps make the chopping platform motion like a scissor, it will realize a entire and less difficult lower.
• Main worm equipment utilizes alloy copper materials, soon after the skilled operator’s manual scraping treatment method and rigorous normal screening, it can guarantees the driving parts ten several years life.
• The principal chains undertake imported British Renold model, the distinctions of 10 chains are considerably less than .2mm.
• The join among equipment box and driving shaft adopts sleeve and pin composition ensuring a strong connection.
  • Speed:  

The equipment adopts frequency controller to obtain stepless speed acceleration which can attain to 4500 instances per hour. In the course of real creation, it can usually run at 3600 to 4000 instances for every hour in accordance to the quality of the board. If the quality of the paper is great, a excellent operator even can operate the machine at 4200 times for every several hours without having feeling way too difficult.
 

• Safety:

As it is proven in the photograph of the device, the device adopts rear element paper feeding approach which keeps the operator absent from the die-chopping portion. The mounting and adjustment of the die plate is also carried out outside of the die-slicing portion with sensors and detectors at die-reducing portion to make sure that the device can not be began when the die-cutting plate is at adjustment position.
Besides the sensors at die-cutting component, there are sensor or approach switches at window portion to make the total machine at checking status to make sure its protection.

• Operation ease:

There is Gentleman-machine interface installed in the control panel which will demonstrates the security standing of the machine as properly as malfunctions to facilitate the operator. Digicam is also mounted in front of the operator for him/her to keep an eye on the procedure status at the shipping part.

• Main Buildings and Crucial Materials Employed
  • 4 Main Huge Parts:

They are referring to: bottom station, moving platform, upper system and equipment wall. The bottom station is created of gray forged iron -HT 200 the transferring platform is ductile iron – QT forty two-ten and the device wall is high quality A3 steel.

• Main Push:

The eleven KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving established to make certain stable pressure out put of not less than 300 tons.

 
The content for the worm shaft is 40Cr with quenching therapy and equipment hardness HRC forty five-fifty. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is employed is SKF. The bush is copper alloy ZQSn6-6-3.

• Die-chopping and Creasing Part:

The travel is transferred by way of crank rod to pendulum which will carry the moving system to move up and down to achieve die-minimize and creasing objective.
The pendulum is produced of large top quality ductile iron. The pendulum axis is carried out by induction harden with surface area hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automated die-reducing and creasing equipment. In contrast with automated die-reducing and creasing device which is utilized for cardboard die-chopping, this sort of semi-automated die-reducing and creasing machine is mainly utilized for corrugated board which demands less pressure for die-reducing, in this case quite some producers have manufactured smaller sized width on the pendulum and scaled-down diameter on the pendulum shaft. We keep wider pendulum and greater diameter on its shaft to make our machine last for a more time lifestyle.
 
 
The die-cutting plate makes use of 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  

• Board Conveying:

 

It adopts 3-cam intermittent positioning system to make certain the boarding conveying accurate and steady.
The equipment makes use of gripper bar type with 12A lengthy joints chain which is considerably less in fat and less shock to the intermittent device below the precondition to ensure the power of the chain. The model of the chain is Remold U.K with higher exact and quality. .    
The Gripper bar adopts aviation aluminum with three bridge sort- gentle in weight and higher in energy.

• Electric Portion

 

The electrical areas are made and assembled according to the European CE regular and uses entire world extensive known manufacturer items.

• Set up of Die

The die mounting and dismounting adopts facet withdrawing methods which time preserving and simple for procedure.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is easy, hassle-free and reputable.

• Special Characters of Our Device:
  • Clever And Specific Entrance Lay Design and style:

Compared with the card board sheet, the corrugated board has more power. If the corrugated board abnormally reaches to the entrance lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest situation.
Typically the producers will set up sensors on this portion to stop the device when the paper is fed abnormally to the entrance lay. Even so, when the device is running at the large pace, the inertia will carry the machine to run for a although to make the entrance lay to its maximum point and then also damage the front lay and the gripper bar.
Our special style is that when the irregular board feeding transpires and becoming detected, the front lay can by no means reaches to its greatest level which helps make cost-free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our unique style, so there is no image to be demonstrated below.

• Optional Shipping System:

In accordance to the requirement of the client we can do the shipping and delivery platform possibly square sort or E sort (as shown in the picture) . If the shopper has enough pallets, he can select sq. type. If the client does have enough pallet, he can pick, E variety platform for which will also supply 4 supply trolleys.      

• Pneumatic Preloading and Lifting Action Device:

 

The preloading gadget is pneumatic pushed. When a single paper dimensions is established, when you do other pile of preloading, there is no hassle of you to reset the preloading system, you can just push the button and the equipment will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

• Dancing Roller Feeding:

Fairly some of the die-slicing device producers use direct feeding method which is the operator will feed the board straight to the mouth of the gripper. What we have identified that the feeding time to the gripper is only .3 seconds which makes the board feeding work hard and inaccurate.
 
Our equipment employs an additional dance roller feeding system whose board feeding time can be extend to .6 next. Jointly with the conveying components it tends to make an simpler operate of the operator and more rapidly in efficiency of the machine.
For case in point:  If an operator operates the immediate feeding semi-automated die-chopping device at 3300 sheets per hour, he can easily operate our device at 3700 – 4000 sheets for each hour.

• Conveying Part:

 

The board acquired by the dance roller will go via a conveying component with belt conveying and belt pressing which makes the board getting pressed ahead of reaching to the front lay.
Before the board reaches to the entrance lay, he will be repositioned by the facet lay.
By these approaches, the board conveyed by the dance roller will be more correct and stable when they achieve to the gripper bar.
There is also detector to detect the status of the board. If board does not appear to the front lay at normal place, the detector will ship indicators to quit the machine.

• Configurations:

Name	Brand and Origin	Remarks
Bearing	SKF Swiss	Essential part
	IKO Japan or HangZhou, China	Not key element
Chain	Renold U.K	Principal Chain ( Discrepancy of less than .2 mm for per 10 chains of machine chain length)
	CHOHO Japan	Other Chain are Choho Japan
Relay	Omron Japan
Contactor, buttons	TELEMECANIQUE France
Picture Electrical Change	Fotek ZheJiang
Stabilizer	MEANWELL ZheJiang
Variator	Delta ZheJiang
Principal Motor	Siemens	Joint Enterprise
PLC	Delta, ZheJiang
Guy-device Interface	Delta
Pneumatic Elements	Dawn, ZheJiang
Rotary Joints	SMC Japan
Motor at feeding and shipping	CPG ZheJiang

 
 

/ The use of authentic tools manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the outlined alternative components contained herein are not sponsored, accredited, or produced by the OEM. /