Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements,a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….
Overview
Quick Details
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
Egypt
- Showroom Location:
-
Egypt
- Type:
-
parts
- After-sales Service Provided:
-
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Worm gears are the most compact type of system and provide high-ratio speed reduction. They are often the preferred type of gearing system when space is limited and large gear reductions are needed. Worm gears can be used to either greatly increase torque or greatly reduce speed. They are also the smoothest and quietest of the gear systems, as long as they are properly mounted and lubricated.
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
| TYPE | BMM-8 | BMM-12.5 | BMMEPG specializing in the manufacture–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed. of rotocultivator ploughshares and other non-standardized farm machinery cutting tools. -20 | BMM-32 | BMM-40 | BMM-50 | |
| Displcement (ml/r) |
8.2 | 12.9 | 19.9 | 31.6 | 39.8 | 50.3 | |
| Max.Pressure. Drop (Mpa) |
cont. | 10 | 10 | 10 | 10 | 9 | 7 |
| int. | 14 | 14 | 14 | 14 | 14 | 14 | |
| peak. | 20 | 20 | 20 | 16 | 16 | 16 | |
| Max. torque (N.Mm) |
cont. | 11 | 16 | 25 | 40 | 45 | 46 |
| int. | 15 | 23 | 35 | 57 | 70 | 88 | |
| peak. | 21 | 33 | 51 | 64 | 82 | 100 | |
| Max. Speed (cont.)(r/min) |
1950 | 1550 | 1005 | 630 | 500 | 395 | |
| Max. Flow (cont.)(L/min) |
16 | 20 | 20 | 20 | 20 | 20 | |
| Max. Output. Power (cont.)(Kw) |
1.8 | 2.4 | 2.4 | 2.4 | 2.2 | 1.8 | |
| Weight(kg) | 1.9 | 2 | 2.1 | 2.2 | 2.3 | 2.4 |
