DUMP TRAILER Energy UNIT

DUMP TRAILER Energy UNIT-DOUBLE ACTING
Basic Description
This electrical power unit includes a power up energy down circuit with load holding on both A & B ports. A strain compensatred flow management is usually added to circuit to regulate the decent speed with the cylinder.
Exclusive Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned before set up of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities. N46 hydraulic oil is recommended.
four. The power unit need to be mounted horizontally.
five. Check the oil degree in the tank just after the first working of the electrical power unit.
six. Oil modifying is required immediately after the initial one hundred operation hrs, afterwards as soon as every single 3000 hours.

DUMP TRAILER Energy UNIT- SINGLE ACTING
General Description
This electrical power unit includes a energy up gravity down circuit. Get started the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve is often supplied if necessary. Also a pressure compen sated movement handle is usually added towards the circuit to regulate the descent velocity on the cylinder.
Remark: Please consult our revenue engineer for that various pump displacement, motor energy or tank capacity.
Unique Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned ahead of set up of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of impurities.N46 hydraulic oil is recommended.
four. The energy unit really should be mounted horizontally.
five. Check the oil level during the tank just after the preliminary working of your power unit.
6. Oil transforming is required just after the first 100 operation hrs, afterwards when every 3000 hrs.